Biograde (Nanjing) Pty Limited
Main products:Biodegradable Resin,Biohybrid Resin,Biodegradable Bag,Biodegradable Film,Biohybrid Bag,Biohybrid Film
Products
Contact Us
  • Contact Person : Mr. Lee Brian
  • Company Name : Biograde (Nanjing) Pty Limited
  • Tel : 86-25-52726290
  • Fax : 86-25-52729477
  • Address : Jiangsu,nanjing,Building B5,Baijia Lake Sci.&Tech. Industrial Park,No.2 Qingshui Ting West Rd,Jiangning Development Zone,Nanjing,China
  • Country/Region : China
  • Zip : 211100

biodegradable and compostable resin

biodegradable and compostable resin
Product Detailed
A fully biodegradable resin for rigid moulding applications Greater than 98% biodegradability when tested to ISO14855

Biograde B-M

A fully biodegradable resin for rigid moulding applicationsGreater than 98% biodegradability when tested to ISO14855Can be used for injection moulding and profile extrusion

Description

BIOGRADE B-M is a fully biodegradable plastic based on a blend of thermoplastic starch (TPS), aliphatic polyesters (AP) and natural plasticizers.  This grade of resin is compatibilised to offer a high level of mechanical strength, good elongation properties and toughness.  The resin is based on corn starch which is a renewable material.  The resin does not contain polyolefins.

Applications

Biodegradable injection moulded products such as cutlery, toothbrushes, combs, shavers, golf-tees, plant markers, etc.Extruded tubes and rodsBiodegradable stakes and pegsBiodegradable tagsExtruded pipesInjection moulded caps and closuresCompostable rigid products if wall thickness is kept below 1 mm.

    

 Specific Instructions for Moulding of BIOGRADE B-M Resin:

Before moulding the resin, the injection moulders barrel needs to be purged and cleaned of residual polyethylene or other polymers and then the BIOGRADE B-M resin can be used as the last cleaning step, after which the temperature can be adjusted to the correct settings.

Other Comments

The mouldings need to condition for 1-2 days after processing to develop their full strength.  During the conditioning the starch component reabsorbs its moisture content making it more ductile.BIOGRADE B-M resins can be blended with natural fibres such as flax, hemp, sisal and coconut hair (coir) to add reinforcement and to assist with water-wicking into thick section mouldings.Wet resin should be dried before processing to limit degradation induced by water (hydrolysis).

biodegradable and compostable resin



Copyright Notice @ 2008-2012 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.